Licht24 Pro Manual - The main menu

The main menu

Controller > Close
Quits the program.

Programs > Edit
Making your own programs.

Programs > Programs Extras
Settings for automatically change programs.

Programs > Automatic timer > Load...
Loads earlier saved settings for timer 1-24.

Programs > Automatic timer > Save...
Saves current settings of timer 1-24.

Programs > Automatic timer > Lettering...
Set your own lettering for saved settings.

Programs > Automatic timer > Automatically load [every full hour]
reload the .uhr files every full hour

Programs > Automatic timer > Reload now
reload the .uhr files

Programs > Automatic timer > Stop watch mode
Use internal stopwatch instead of system clock

Programs > Automatic timer > Remote control
Control the stopwatch with external push buttons.

Programs > Automatic timer > Remote control settings
COM-Port external push buttons.

Programs > Automatic timer > Start music controlled
Starts the stopwatch music controlled.

Programs > Automatic timer > Channel 1-24
Shows the alarmlist window for the selected channel.

Programs > Report > Channels
Overview of all programmed switching times,
sorted via channels.

Programs > Report > Days
Overview of all programmed switching times,
sorted by days.

Programs > Report > Lettering
Overview of all output names, sorted by channel.

Programs > Report > Show alarms.log
Shows the time switch log file.

Programs > Report > Clear alarms.log
Clears the time switch log file.

Programs > Report > Show error.log
Shows the error log file.

Programs > Report > Clear error.log
Clears the error log file.

Programs > Report > Log all
All switches are added to the report.

Extras > Autostart on boot
Starts Licht24Pro automatically on Windows logon.

Extras > Lettering button...
Sets an individual caption for each button.

Extras > Lettering box...
Sets an individual caption for each output control panel.

Extras > Buttons same caption like Box
The lettering of the output control panel is shown on the button, too.

Extras > Show loaded settings
Shows the name of the loaded setting in the display.

Extras > Pulse mode settings...
To control notching relays or switching off delays
(output creates impulse).

Extras > Restore last settings on start
Time- or flashing times, switches or running
programs will be restored on program start.

Extras > Reset outputs on program close
The outputs are cleared by default on program
close. This behaviour can be set to ON/OFF here.

Extras > Show Time
Shows the current time in the status display.

Extras > Random 1
Controls 1 channel randomly.

Extras > Random 2
Controls 2 channels randomly.

Extras > Random 3
Controls 3 channels randomly.

Extras > Random 4
Controls 4 channels randomly.

Extras > Random-Setup...
Sets the last output for random control.

Extras > Clock syncron
Evens impulse times.

Extras > Bind keyboard to switch
Using the keyboard will set the permanent switch.

Extras > As nonlocking key
The permanent switch behaives as a nonlocking key.

Extras > Fullscreen
Set the program to fullscreen.

Extras > Set application priority
Set the program priority. HIGH is suggested!

Extras > Error messages > Command line
Error messages while command line control on or off.

Extras > Error messages > QLib messages
Error messages for QLib on or off.

Extras > Sound Setup
Opens the set up window for the sounds feature.

Extras > Counter
Activates the counter function.

Devices > OFF
Stops all data output.

Devices > 8255
Activates data output for the 8255 card.

Devices > 8255 > Extras > Reset
Initializing card.

Devices > 8255 > Extras > I/O Address
Card's hardware address.

Devices > 8255 > Extras > Set data speed
Sets the speed of sending data to the card.

Devices > 8 Channel Parallel
Activates data output for a parallel card.
e.g. Hygrotec, Kemo B210, Kemo M125, Weidner, ...

Devices > 8 Channel Parallel > Extras > Reset
Initializing card.

Devices > 8 Channel Parallel > Extras > LPT-Port
PC connection.

Devices > 8 Channel Parallel > Extras > Set data speed
Sets the speed of sending data to the card.

Devices > Conrad Serial
Activates data output for the Conrad Serial.

Devices > Conrad Serial > Extras > Reset
Initializing card.

Devices > Conrad Serial > Extras > Boards count
Usage for one, two or three cards.

Devices > Conrad Serial > Extras > COM-Port
PC connection.

Devices > Conrad Serial > Extras > Card informations
Shows the card version and answer frame.

Devices > Deditec
Activates data output for a Deditec device.

Devices > Deditec > Extras > Reset
Initializing card.

Devices > Deditec > Extras > Set data speed
Sets the speed of sending data to the card.

Devices > ELV > ELV CSI 7002
Activates data output for the ELV CSI 7002.

Devices > ELV > ELV CSI 7002 > Extras > Reset
Initializing card.

Devices > ELV > ELV CSI 7002 > Extras > COM-Port
PC connection.

Devices > ELV > ELV CSI 8 USB
Activates data output for the ELV CSI 8 USB.

Devices > ELV > ELV CSI 8 USB > Extras > Reset
Initializing card.

Devices > ELV > ELV IO 88
Activates data output for the ELV IO 88.

Devices > ELV > ELV IO 88 > Extras > Reset
Initializing card.

Devices > ELV > ELV IO 88 > Extras > COM-Port
PC connection.

Devices > Hoffmann IO32USB / IO16USB
Activates data output for the Hoffmann IO32USB or IO16USB.

Devices > Hoffmann IO32USB / IO16USB > Extras > Reset
Initializing card.

Devices > Hoffmann IO32USB / IO16USB > Extras > Set data speed
Sets the speed of sending data to the card.

Devices > Pollin AVR-NET-IO
Activates data output for the Pollin AVR-NET-IO.

Devices > Pollin AVR-NET-IO > Extras > Reset
Initializing card.

Devices > Pollin AVR-NET-IO > Extras > Setup
Sets the IP-Address and TCP/IP port.

Devices > Quancom > Quancom PCIREL16
Activates data output for the Quancom PCIREL16.

Devices > Quancom > Quancom USBREL8
Activates data output for the Quancom USBREL8.

Devices > Quancom > Quancom USBREL8 > Extras > Reset
Initializing card.

Devices > Quancom > Quancom USBREL8 > Extras > Boards count
Usage for one, two or three cards.

Devices > Quancom > Quancom USBREL8 > Extras > Set data speed
Sets the speed of sending data to the card.

Devices > Quancom > Quancom USBREL8LC
Activates data output for the Quancom USBREL8LC.

Devices > Quancom > Quancom USBOPTO16IO
Activates data output for the Quancom USBOPTO16IO.

Devices > Quancom > Quancom USBOPTOREL16
Activates data output for the Quancom USBOPTOREL16.

Devices > Quancom > Quancom USBTTL24
Activates data output for the Quancom USBTTL24.

Devices > Quancom > Quancom USBOPTOREL32
Activates data output for the Quancom USBOPTOREL32.

Devices > Quancom > Quancom USBOPTOREL32 > Extras > Reset
Initializing card.

Devices > Quancom > Quancom USBOPTOREL32 > Extras > DeviceID
Card's hardware address.

Devices > Quancom > Sort devices by DIP switch
Sort the device address by DIP switch or software.

Devices > Velleman > Velleman K8055 USB
Activates data output for the Velleman K8055 USB.

Devices > Velleman > Velleman K8055 USB > Extras > Reset
Initializing card.

Devices > Velleman > Velleman K8055 USB > Extras > Boards count
Usage for one, two or three cards.

Devices > Velleman > Velleman K8055 USB > Extras > Address
Card's hardware address.

Devices > Velleman > Velleman K8055 USB > Extras > Set data speed
Sets the speed of sending data to the card.

Devices > Velleman > Velleman K8055 USB > Extras > Card Informations
Status view of the inputs and other informations.

Devices > Velleman > Velleman K8055 USB > Extras > Input Setup
Settings for using the inputs.

Devices > Velleman > Velleman K8056
Activates data output for the Velleman K8056.

Devices > Velleman > Velleman K8056 > Extras > Reset
Initializing card.

Devices > Velleman > Velleman K8056 > Extras > Boards count
Usage for one, two or three cards.

Devices > Velleman > Velleman K8056 > Extras > Com-Port Board1
PC connection (1st board).

Devices > Velleman > Velleman K8056 > Extras > Com-Port Board2
PC connection (2nd board).

Devices > Velleman > Velleman K8056 > Extras > Com-Port Board3
PC connection (3rd board).

Language > English
English user interface.

Language > Deutsch
German user interface.

Skin > Load
Loads different designs...

Skin > Activate
Activates design.

Skin > Deactivate
Deactivates design => Windows standard design.

Help > Manual
Runs the manual.

Help > History
Shows the version history.

Help > Licht24 Pro website
Internet shortcut to the Licht24 Pro website...
(you need a connection to the web)

Help > Licht24 Pro Forum
Internet shortcut to the Licht24 Pro forum...
(you need a connection to the internet)

Help > Check for updates
Checks if there is a new version available
(you need a connection to the internet)

Help > General Information
Shows the About box with program and license infos.

Top